Propagation: Misting Controllers , 1 by holty

holty wrote:
Hi Janet ,

I made the benches because I couldn't find any I liked and when I took a plan of what I wanted to a manufacturing shop they quoted me almost 4 times more than I expected !!!!!! ( eventually need 60 or two different styles)

The size was / is determined by height and width to suit the operator / product . 6 meters long by 1200mm wide by 750mm high.(adjustable + or - 100 mm ) . These in this little igloo have 4 legs that will support around 500 kilos or so per bench ( propagation ) but others will have 5 or 6 legs to suit heavier pots / trays etc.

Again the legs are adjustable and slide up or down the center rails . 25mm x 2.6 galv pipe with one leg brace locking the frame together . The mesh is in sheets 2m X 1200 mm and just sit on the frame . The "rail lugs" lock them in .

A bit of a hassle to make Janet , but totally adjustable and can be dismantled and moved by one person.

Hope this helps ,
John.