Propagation: part II on basic how to propagation based on my experience, 1 by Pughbear7

Pughbear7 wrote:
Ok here is the drawing of a system. you may need to either use a shallow tote or block up the misters to reach the root zone. I think I would use a shallower tote and possible put in a drain back to the submersable pump. I think a "bushing can be found at the local hardware store to attach to pvc and plumb it back to the reservoir. Also you may want to use a weak solution (about 20% - 25%) strength of liquid fertilizer (peters, shultz) some granular you mix with water. I would strain the mix so that you don't get any solids in the tank that could clog up the pump. A hand held strainer with a cloth in it to strain it down to fine particulate comes to mind.

Did I miss anything ? I hope its not confusing
Dave