Rural Gardening: Just another homemade incubator, 1 by maineiac

maineiac wrote:
The manual tuner is still under design, but for the current model I took strips of styroboard and ripped them down with a saw, then heated up a bolt/nut and melted a hole into the end of the styroboard. I then epoxied in the nut, melted holes into the side of the cooler with the bolt and threaded the bolt into the nut which had been secured in the foam.. Presto - now all there is to do is wait for the turkey eggs, and make a pattern to drill the holes in the styro strips for holding the eggs.