Water Gardening: Easy and inexpensive pond..., 1 by BigDaddy99

BigDaddy99 wrote:
First step is to saw all of the timbers in two at a 60 degree angle. The pool has six sides and if I remember correctly, a circle has 360 degrees so that's why I used 60. So now you have 30 4 foot timbers.

Second step is to drill a hole for the re-bar 8 inches from the square end of each landscape timber. Drill completely through on 18 of the timbers and half way through on the other 12. These 12 are for the bottom layer and the top layer so make sure 6 are drilled with the cut angle one way and 6 are drilled with the cut angle the other way.


This message was edited Sep 26, 2004 7:32 PM