Photo by Melody

Propagation: Plant Propagation - the Basics, February 2017, 1 by juhur7

Communities > Forums

Image Copyright juhur7

In reply to: Plant Propagation - the Basics, February 2017

Forum: Propagation

<<< Previous photoNext photo >>>
Photo of Plant Propagation - the Basics, February 2017
juhur7 wrote:
I agree that red Begonia is an amazing looking plant , You say Begonia here and you usually get the cross types , mostly yellow ,,

I was playing with projects as to cold and windy out for much . I did get some onions for dinner from the garden today though , peas are sprouted , beets are growing slowly .. Most of my so called garden is about to be mulch piles at the back , Poor choices , couple of re -diggings ,not by me or my fault , have me failing too , too often ,, Time to re-set and re-do all that is possible ,
Photo 1 is from 2007 approx .. no blades on spinner , did not finish as was having other difficulties at the time, it was still together until today though .
Photo\'s 2,3,&4 show the newest , The food processor plate will have a square iron blade holder under and held by the cap screw , Also not shown is the locking nut , other blade , . It will be assembled in the can ,shown in pic 1 and will be driven by a socket attached to the lower shaft in , run by a drill ,,
Almost all steel ..those two plastic fittings are all that is not so far , The can and attachments will be metal
None of this has to with the previous up above before , with that one I keep forgetting to hex tighten the shaft bearing ( made it bounce everywhere in the short test ,,